How to Know if Your Products Are Working Or Not
Q. Do Negative Ion or Electron Devices Work?
A: Yes and No. It depends on what you are trying to achieve
Does some good addressing free radicals
No negative side effects, just positive
BUT does NOT address the VGCC (Voltage Gated Calcium Channel) issue. In other words the Chaos (root cause) remains. More info:
Result: only a partial fix
Q: Is “blocking” EMF’s a better way to be protected?
A: No. There are various issues with the “Blocking EMF” solution. Here are 3 examples:
If you used special paint and window shades to block EMFs on all walls and ceilings of your house, EMFs theoretically could not get in. Sounds good, yes? The huge problem is that the EMFs in the home also can not get out. So any EMFs inside the home would be amplified!!! (That means they’d be worse!) EMFs from electrical appliances, Wi-Fi, cell phones, etc, which are inside the home, would all be bouncing off walls inside creating a ton of the Chaos that we’re trying to avoid.
If you blocked EMFs from a cell phone or a Wi-Fi Router (for example), then they would not work anymore. So blocking devices is also not a good idea.
Cellphone cases that “Block EMFs” don’t work and could maybe make things worse. A Microwave Oven heats things up because the photons bounce around in there off of the walls creating so much “chaos” and “vibrating of particles” that things are heated. It might be a terrible idea to have something similar happen inside of your pocket. The microwaves do get out the edges of the case eventually and when they come out, they could have much more “chaos” and vibration. Remember... this is really where the problem comes from regarding EMFs!
Q: Does the Stetzer Dirty Electricity Filter protect us from the harmful effects of EMFs? (We use the Stetzer Dirty Electricity Meter…so should we use their product, the “EMF Dirty Electricity Filter”?)
A: No. The makers probably meant very well but it seems like many other products out there, don’t understand how EMFs harm people. So they came up with a solution that doesn’t work, and it actually makes it a little worse! Here’s a brief explanation and a VIDEO you can share with clients below.
The Stetzer Filter converts Dirty Electricity frequencies (4,000 to 100,000 Hz) back to Electricity frequencies (60Hz). So their meter reads LOW after their product is plugged in which looks great, but if you test the plug with the Gauss/Electricity Meter you’ll see that these levels went way up at the same time. We know that basically, ALL frequencies produce Subatomic Chaos. So converting one frequency to another didn’t fix anything, and the conversion process itself seems to maybe produce MORE chaos on top of things.
Watch A 2 Minute Video Explanation Here
Q: Do products that claim to block EMFs from a cell phone work?
A: None that we’ve tested. First, if they did work, the cell phone wouldn’t work. It needs that frequency to send and receive info to make calls, use the internet, etc. Also, since you now have a microwave meter you can measure the cell phone with and without the cases that claim to block EMFs. We’ve never found one that works. The EMFs seem to measure just as high with and without the case on.
Q: Is Grounding “Earthing” helpful?
A: It depends! (Since our products take care of seemingly all observable effects, it‘s probably best to avoid grounding mats or other Grounding or Earthing products unless you can at least muscle test the outcomes. Here’s what one engineer says (who is joined by other scientists, MDs, etc):
“When you plug your Earthing mat or bed sheet into the ground of an electrical socket, you are connecting to the ground of your home electrical wiring system. Even if this system is properly grounded, there is a high likelihood that it contains some of the different frequencies that are on your home wiring. These frequencies will then be going into your body through the grounding products whenever you lie down. This electromagnetic interference can create havoc within the 50 trillion cells of your body – all of which communicate using tiny electric signals. This can’t be a good thing over time. Some people can actually feel these frequencies when they sleep on a grounding sheet in a home with dirty electricity.”
“Electric fields can be detected with a spectrum analyzer or body voltage meter. Many people will use the body voltage meter to show that when they are touching a grounding mat/sheet, the electric fields go down significantly. This could lead them to believe that they are protected. However, this is actually incorrect. The electrical field is still present. It’s just that your body is now connected to the ground (it is now part of the circuit so the differential is zero), so it only appears that the field is diminishing. The Earthing equipment is not reducing the electric fields. In fact, by being connected to the ground, you are now part of the very pathway by which all nearby electromagnetic frequencies (including wireless frequencies) will pass through to the Earth and your home electrical system. This will actually add to the EMF pollution that your body is dealing with, rather than reducing it or protecting you.”
More Info On Grounding
Q: What are Schumann waves?
A: EMFs at 7.83 Hz (as estimated by Winfried Otto Schumann).
These are EMFs that travel between the Earth’s Ionosphere and the Earth’s surface. All EMFs travel the speed of light so this is how long they take to bounce back and forth from the Earth to the Atmosphere and back. It is said to be the “pulse of the earth” and to be important for humans because we have evolved with this frequency. It is theorized that with all of the new man-made EMF frequencies added to the earth (and because we spend so much time inside) that we might not be getting this “pulse” that we probably need to be our healthiest.
Q: Are Schumann waves enough to remediate EMFs?
A: “NO” would be our best and easy guess.
Adding healthy frequencies sounds like a great idea to EMF Solutions. But we have never seen it shown anywhere that adding these “good” frequencies takes away the biological or harmful effects of EMFs.
Q: Some Products/Competition: Aulterra plugs, Cell Stickers, Gia, & Greenwave Plug-Ins
Look up the product online and look or search for their claims ( to see which of the 9 ways they are).
Most cell phone use stickers that are weaker from the start and fade fast
Most plug-in devices claim to do gigantic areas and either don’t work at all or work less than a Room harmonizer
Regarding Aulterra: One Aulterra research results show that the power, dBm, of the of their Neutralizer device lowers the power (dBm) of the cell phone by 30%. What happens when you do this? It disrupts the cell phone signal and you may not be able to talk to people with it!
When a cell phone has a lower dBm, it means that the received signal is weaker. Weaker signals are more susceptible to interference, noise, and distortion during transmission. This can lead to a decrease in call quality, such as increased call drop rates, poor voice quality, or slow data speeds.
Emf solution products do not affect the signal at all. Technology makes our lives easier. Emf solution products allow to use your cell phones and laptops and other tech with 100% signal with 100% safety!
