Cell Chip

IMPORTANT NOTE: The Cell Chip works better than any other on the market or your money back guarantee kicks in (see Important Considerations section below). One Cell Chip is suitable for ALL cell phones EXCEPT:

  • iPhone models 12 through 16 (& other newer “MagSafe” iPhones) which require the iCell Chip. Older iPhones (11 and under) can continue to use the Cell Chip effectively. All other, non-iPhone cellphones use the “Cell Chip” model.

  • GOOGLE PIXEL CELLPHONES = Model 5 and after need 2 Cell Chips! (where all other cellphones need only one chip)

Dimensions: 3.0″ x 1.0″ x 0.1″


Important Considerations

  • Works on 4G phones, 5G phones, & everything (except not fully on "MagSafe" iPhones)

  • An average cell phone now measures well over 100 times what is considered safe by expert scientists (the over 4,000 studies at the BioInitiative.org). Phones usually measure well over 2,000 microwatt/m2 as soon as you turn them on…the “safe” levels determined at the BioInitiative are UNDER 30 mW/m2!!

  • ALL OF OUR PRODUCTS are hand-crafted and use a special plant based resin (so they can be healthier than the normal chemical-filled resin products), therefore you will see some imperfections on our resin-using products (all Chips which are used in: Cell, Laptop, Device Chips plus Regular & XL Bands)

  • WARNING: DO NOT USE WITH CORDLESS CHARGERS - they could possibly heat up the metal circular discs (which looks like pennies) in our product - see Instruction Video found at the bottom of this page for more details.

  • WARNING #2: EMF Chip is FRAGILE. Be gentle and DO NOT BEND. It is made as thin as possible to fit under many phone cases.

  • Chip will NOT work if it is between the phone battery & anything metal or magnetic!:

    • Do NOT use a magnetic hanging phone system.  Instead we suggest using a non-metal system such as a Pop Socket.

    • Do NOT use a RFID Case (these have a space for credit cards and they block a thief from scanning your CC's and the problem is that these types of cases have metal or magnets in the case.  And remember you should never put our products between things that are either metal or magnetic)

IMPORTANT: The Cell Chip is the best remediation in the world, BUT it will not work on iPhones 12, 13, 14, or any other “MagSafe” technology phones.  Those phones have magnets in them that make EMF remediation totally different, but our “iCell Chip” works perfectly on those.

* For any reason, including not seeing that our product is the best on the market or equal to the best, you have 60 days to return the product for your money back.

NOTE FOR YOU
This product will never be perfect looking but is near perfect performing. Here’s why: All resin-made products by EMF Solutions, including this one, are imperfect looking because of a safer, less toxic, plant-based resin that takes 3 long days to dry (as opposed to the chemical based resins which take minutes to dry). The dry resin isn’t perfect looking but we sacrifice looks for health and performance.


INSTALLATION INSTRUCTIONS

(See instruction video as well as written instructions)

 

WRITTEN INSTRUCTIONS

Place on back of cell phone ideally UNDER the phone case where it works best. If Chip doesn't fit under your hard phone case then use a SOFT PHONE CASE (such as a rubber or silicone case).

WHAT CASE FITS THE CELL CHIP UNDER IT?

Read all Warnings & Suggestions below.  But we've found that the SUPCASE Unicorn Beetle Pro Series Case should fit Androids, iPhones, and almost any other make and model cell phone. (But remember iPhone 12, 13, 14 & probably 15 and after (so other “MagSafe” phones) should use the “iCell Chip” product not the “Cell Chip”.) The Cell Chip is a tight fit in this SUPCASE but it seems to protect the phone well. Another option for Cell Chips is the Onyx Case by Ringke  www.ringkestore.com. You can search on Amazon or online for these and they claim to have every major phone brand and use military grade silicone. They are often only $12.99 and often in stores too.

SUGGESTIONS:

  1. If the Cell Chip is OUTSIDE of the phone case it still works but slightly less than its full potential.

  2. Either side of the Chip may face the phone.

OTHER SUGGESTIONS: We suggest using clear or scotch tape to hold chip in place then putting the case over it. You can also put it OVER the case but it might work 90% or less as well that way. Also do NOT use a Bluetooth headset which is not able to be remediated. We suggest instead using a wired headset.