iCell Chip
$89.95
If you would like to purchase this product click here
For iPhone models 12 through 16 (& other newer “MagSafe” iPhones). Older iPhones (11 and under) can use either the “iCell” Chip or the “Cell” Chip effectively. All other, non-iPhone cellphones use the “Cell Chip” model.
DESCRIPTION
Works better than any other on the market or your money back guarantee kicks in.
An average cell phone now measures well over 100 times what is considered safe by expert scientists (the over 4,000 studies at the BioInitiative.org). Phones usually measure well over 2,000 microwatt/m2 as soon as you turn them on…the “safe” levels determined at the BioInitiative are UNDER 30 mW/m2!!)
ALL OF OUR PRODUCTS are hand-crafted and use a special plant based resin (so they can be healthier than the normal chemical-filled resin products), therefore you will see some imperfections on our resin-using products (all Chips which are used in: Cell, Laptop, Device Chips plus Regular & XL Bands).
iCell Chips require almost twice the amount of a totally different raw material and therefore these are THICKER than the regular Cell Chips.
To find a Case that fits please go to the “Installation Instructions” BELOW
WARNING: DO NOT USE WITH CORDLESS CHARGERS - they could possibly heat up the metal circular discs (which looks like pennies) in our product.
DO NOT USE WITH a Metal Plate Magnetic Cell Phone Holder!
DO I NEED THE "CELL CHIP" OR "iCELL CHIP"?
The new "MagSafe" iPhone 12 & 13 models contain new technology and must use this Chip (not the regular "Cell Chip"). Any other future model iPhones (or if any other brands start using magnetic technology in their phones) then those phones would also need the "iCell Chip". All other cell phone models should use the regular "Cell Chip". Both chips work on both phones BUT using the correct chip is significantly more effective.
Dimensions: 3.0″ x 1.0″ x 0.17″
**Disclaimer: this product does not include a case or holder for the iCell Chip**
INSTALLATION INSTRUCTIONS
Option 1: Place chip under phone case (which is the preferred method which maximizes effectiveness). Put in the middle of phone to fit. Optional - you can use Packing or other tape to adhere chip to center of phone to ensure chip stays in middle. Rubber, silicone & most flexible cases usually work. We’ve found that TPU material works best and can be found for very cheap off of Amazon —> TPU Case - EXAMPLE. If you have the iPhone Mini or an inflexible case, you may have to choose Option 2 below. We've found that the SUPCASE Unicorn Beetle Pro Series Case often fits the iPhone Mini, although it is a tight fit, and protects phones well too.
Option 2: Tape chip onto the outside of phone case. (See examples above) Unless your case is extra thick this should completely remediate your phone. Double-sided 3M tape included is VERY sticky but takes 24 hours to dry (harden) completely. At first it doesn't seem very sticky. If after 24 hours, it isn't super securely attached, you can use Duct or Gaffer Tape instead or in addition.
WHAT ASSISTS ATTACHING PRODUCT TO BACK OF PHONE CASE? Many Credit Card cases which attach to the back of a phone or a phone's case can fit the Cell Chip or iCell Chip to the back of any phone (see pictures above). You can search for "Credit Card Case for XXX Cell Phone" on Amazon. Or this link may also be an example that works --> CC Case for Cell or iCell Chip - EXAMPLE or Credit Card Holder Built into the case -EXAMPLE
See Image below:
