Laptop Chips

$84.95

If you would like to purchase this product click here

Comes with 2 Chips for ONE Laptop, Tablet, or Kindle.

Remediates EMF’s even when streaming video (which produces highest EMF levels in our testing). We’ve found nothing else on the market that comes close to doing that.

Secures to the bottom of laptop to travel with you anywhere you go!

Laptops emit electrical radiation, “Dirty Electricity”, and WIFI. These and Tablets and iPads are very important to take care of.

ALL OF OUR PRODUCTS are hand-crafted and use a special plant based resin (so they can be healthier than the normal chemical-filled resin products), therefore you will see some imperfections on our resin-using products (all Chips which are used in: Cell, Laptop, Device Chips plus Regular & XL Bands)

Dimensions: 2.0" x 1.0" x 0.13"

NOTE FOR YOU

This product will never be perfect looking but is near perfect performing. Here’s why: All resin-made products by EMF Solutions, including this one, are imperfect looking because of a safer, less toxic, plant based resin that takes 3 long days to dry (as opposed to the chemical based resins which take minutes to dry). The dry resin isn’t perfect looking but we sacrifice looks for health and performance.

INSTALLATION INSTRUCTIONS

(SEE VIDEOS BELOW)

WRITTEN INSTRUCTIONS

LAPTOPS - Use tape to adhere the two chips under the front corners of your laptop, like in the picture. Please use your own tape and read why here. If the bottom of your laptop or tablet is smooth we suggest using packing tape. If the bottom is rough with a texture we suggest using duct tape or gaffer tape (packing tape “could” come off depending on how rough you are with your laptop or tablet. We do not suggest using masking tape, scotch tape, or electric tape which are likely not as strong.

We stopped including double-sided sticky tape so that it will be much easier to remove the Chips from one laptop and put on another. (The double-sided 3M tape was so strong it made many chips break when trying to remove them. Therefore, we now suggest choosing your own tape.)

TABLETS – the ideal placement is to put one of the Laptop Chips in the corner near the camera lens & the other on a different corner of the tablet. See illustration BELOW - Chip Placement is in RED.