We try to keep all information here as up-to-date as possible but for those who want to be in-the-know as soon as possible the first place we upload EMF updates is here: https://drkwik.com/updates-developments
iCell Chip Ultra
iPhone Models 12 and after with “Magsafe” technology must use the iCell Chip. iPhones prior to 12’s can use either this “iCell Chip Ultra” or the regular “Cell Chip Ultra”.
EMF Solutions feels that this is one of the three most important products which are a Home Harmonizer (or Room Harmonizer minimum) upgraded after April 2026, a personal device (XL Band or Personal Card Ultra also upgraded after April 2026) and a Cell or iCell Chip Ultra.
This NEW UPGRADED chip is much smaller and much stronger than ever before. Fitting ALL phones now.
A.I. adds a new level of subatomic chaos unlike anything seen before in cellphones, tablets, or laptops. But now there’s an amazing solution for it! This new chip is specifically designed to handle chaos from the built-in A.I. (they call “Apple A.I.”) and/or updated software (which seems to have similar EMF characteristics of Artificial Intelligence). See below for which Apple phone models have built-in A.I.
Description
An average cell phone now measures well over 100 times what is considered safe by expert scientists (the over 4,000 studies at BioInitiative.org). Phones usually measure well over 2,000 microwatt/m2 as soon as you turn them on… the “safe” levels determined at the BioInitiative are UNDER 6 mW/m2!!)
Nobody reads the fine print but when you sign your phone contract you are accepting that your phone is OVER the safety guidelines set by the FCC. ALL CELL PHONES, especially iPhones, are reported to be many times over the FCC’s radiation safety guidelines of 1.6 W/kg avg over 1g of tissue.
iPhone 17’s have built-in A.I. 15 and 16 Pro and ProMax also have it built-in called “Apple A.I.”. And older iPhones seem to need this new upgraded chip as soon as the new upgraded software happens which seems to have started around June 2026 for many phones. For those who can muscle test their phones you’ll see even older model phones now test off unless this new upgraded chip is on it, especially when logged into any A.I. program such as Chat GPT, Perplexity, etc.
Works better than any other on the market.
This is the only product that can tackle the subatomic chaos from this A.I.
This is the ONLY cell phone product muscle tested by a group of professional practitioners to be effective while live streaming a video, or on a call, or especially using A.I.
NOTE: ALL OF OUR PRODUCTS are hand-crafted and use a special plant based resin (so they can be healthier than the normal chemical-filled resin products), therefore you will see some imperfections on our resin-using products (all Chips which are used in Cell, Laptop, and Device Chips plus Regular and XL Bands)
How To Attach: See below for full installation guide–but basically you can put it either under your case (it usually fits best when in the middle of your phone case) or you can use double-sided sticky tape included to place next to your camera lenses (see picture examples above). Please keep in mind the Installation Instructions below are for the older iCell Chip version which was bulkier.
MAKE SURE THE CHIP IS NOT TOUCHING A MAGNET. Put the chip on the top right corner if you have a magnet in the center of your phone.
Dimensions: 1.0″ x 0.5″ x 0.1″
INSTALLATION INSTRUCTIONS
FIGURE 1
Necessary for iPhone models 12 and up and ALL other “MagSafe” supported iPhones or Android devices with similar counterpart.
iPhones prior to model 12 use the iCell Ultra but can technically use the Cell Chip Ultra as well (though we recommend just sticking with the iCell if you plan on staying in the Apple ecosystem)
The regular “Cell Chip Ultra” (another product) is for all other kinds of cell phones (other than iPhones)
3M Sticky Tape is included if chosen to affix the chip onto the outside of the phone case or if needed to affix to a phone without a phone case.
Place on back of cell phone ideally UNDER the phone case where it works great and is most secure. But it also works as well on the outside of your case such as next to your camera lense(s) – see FIGURE 1 above.
If the chip doesn’t fit under your case (like if your case is too stiff) you may need to use a soft(er) case (such as a rubber or silicone case).
WHAT CASE FITS THE CELL CHIP UNDER IT?
Read all Warnings & Suggestions below; but we’ve found that the SUPCASE Unicorn Beetle Pro Series Case should fit Androids, iPhones, and almost any other make and model of phone. (But remember iPhone 12 thru 17 & other [so all “MagSafe” phones] should use the “iCell Ultra” product not the “Cell Chip Ultra”.) The chips are a tight fit in this SUPCASE but it seems to protect the phone well. Another option for iCell chips is the Onyx Case by Ringke (www.ringkestore.com). You can search on Amazon or online in general for these and they claim to have every major phone brand and use military grade silicone. They are often only $12.99 and can often be found in stores as well.
In addition to these we may have some cases and accessories that we’ve found to work on our Amazon Affiliates page and/or our EMF Solutions product page.
WARNINGS AND SUGGESTIONS
WARNING: DO NOT USE WITH CORDDLESS CHARGERS – unless you put the chip at the top near the camera lenses and AWAY from the middle of the phone. See FIGURE 1 above.
WARNING #2: EMF Chip is FRAGILE. Be gentle and DO NOT BEND.
If the Cell Chip is OUTSIDE of the phone case it still works great.Either side of the Chip may face the phone.
Chip will NOT work if it is between a phone battery & anything metal or magnetic! So:
Do NOT use a magnetic hanging phone system (unless the chip is away from the middle near the top by the camera lense(s) as seen above). Instead we suggest using a non-metal system such as a Pop Socket.
Do NOT use a RFID Case (these have a space for credit cards and they block a thief from scanning your CC’s and the problem is that these types of cases have metal or magnets in the case. As mentioned before, you should never put the products between things that are either metal or magnetic).
OTHER SUGGESTIONS: Even when putting the chip under the case it’s recommended to use clear or scotch tape to hold the chip down and then putting the case over it. Do NOT use a Bluetooth headset which is not remediated and/or not able to be remediated. It’s best to simply use a wired headset if that’s the case.