Most Common Questions:
Question 1: “Do the meters show a difference before and after use of products?”
Answer & explanation:
Products do not “block” EMF’s (which would have meter go down low or to zero). If we “blocked” EMF’s then nothing would work. Cell phone wouldn’t ring. Wi-Fi wouldn’t work, FM Radio wouldn’t work. Etc. So this is not realistic.
The EMF Meter measures how much radiation, not if it is “Polarized” or not. And meters do not measure the Subatomic Chaos, the cause of our damage from EMF’s and the part of the environment our products fix.
There is no meter that measures the Chaos…YET. We are working on it.
The Products change the field that EMF’s travel through, not the EMF itself (or at least not most of the EMF’s).
With this, our products effect the SUBATOMIC CHAOS (not the EMF directly)
This method stops all of the observable effects of EMF’s (as shown in Blood Microscopy & other Testing, etc)
EMF without our products damage your DNA. 24 hours on a cell phone = 1600 chest X-rays. See mechanism of injury here: https://emfsol.com/ Watch 3 min video on bottom left of page
Question 2: “How do I know the products work?”
Answer & explanation:
There are at least 7 Ways we know the products work amazingly well:
Blood Microscopy Testing
Muscle Testing
Acugraph Testing
Mold Testing
Muscle Testing (Done by Dr. Kwik at his office or your home)
Testimonials (over half who fix their home notice a difference ASAP!)
& more coming soon
Question 3: “I don’t feel good after the products were installed”. Please follow the detox protocol here:
Question 4: How do I install the Products?
Most instructions will be found here: https://emfsol.com/shop/. Click on the item to get detailed instructions
Special instructions:
TAPE ON THE SIDE OF THE CEILING FAN DOME COVER AWAY FROM THE DOOR ENTRANCE SO PEOPLE DON’T SEE IT WHEN THEY WALK IN
Laptop chips: I like using the double sided tape to protect the computer from being scratched but it may not be enough if you move around with your laptop a lot. In that case, use duct tape (I prefer, “6 mo no residue tape” from Home depot but you can use any duct tape)
Cell chips: If you have a case, it must be flexible otherwise you need to duct tape it to the outside of the case. Magnet holders must not be used because it will decrease effects of the chip. Same rule applies as above for double sided tape.
Ceiling Fans:
You can either remove the stone from the ‘device chip’ and duct tape it to the ceiling fan dome case that is next to the ceiling or remove the dome cover and clip directly to the wires. Please make sure the stone is directly touching the wires before you put the dome back on.
Room harmonizers
These used to be the “whole house” applications/remediation but now are primarily for small apartments. These are beneficial for several applications:
Take with you when you stay at hotels or other house, plug in next to bed
Plug in on a wall with a AC unit on the outside of the wall of the bedroom or a room where you hangout a lot during the day as well.
Plug in next to master bedroom or other bedroom bed where you feel you need “extra” protection or for someone in your house that is “emf sensitive” or has health issues.
Question 5: How are the products made?
They are hand crafted from natural earth materials and tested for efficacy. Only 2% pass the scientific testing to get the remediation results desired.
Its not pretty but it WORKS! Close to 100 Emf solutions experts test so many other products that are not bulky and look high tech and “neat” but either work only temporarily, don’t work at all or God forbid make things worse. You are making the right choice when you choose these hand made “patent pending” products to remediate your home because they work!